Skip to content
Wheel Nuts Jeep WK2 Grand Cherokee 5/127
Wheel Nuts Jeep WK2 Grand Cherokee 5/127

Wheel Nuts Jeep WK2 Grand Cherokee 5/127

by Jeep City
$5.50 - $5.50
$5.50
$5.50 - $5.50
$5.50

Wheel Nuts – Jeep Grand Cherokee WK2 (2011–2022) | Factory Alloy Wheel Specification

If you're replacing a damaged wheel nut, refitting wheels after a tyre change, or simply ensuring you have the correct hardware on hand, these are the correct factory-spec wheel nuts for the Jeep Grand Cherokee WK2. Getting the wrong nut — incorrect thread pitch, seat angle, or hex size — can result in cross-threading, wheel damage, or a wheel coming loose on the road. These are the right ones.

Specifications

  • Thread: M14 x 1.50
  • Seat type: 60-degree tapered/cone seat — correct for factory WK2 alloy wheels
  • Socket size: 19mm or 3/4" hex
  • Torque: 130 Nm (factory specification — confirm with your workshop manual)

Compatible Models

  • Jeep Grand Cherokee WK2 (2011–2022) — all variants with factory alloy wheels

Note: Aftermarket wheels may use a different seat type (e.g. flat seat or radius seat). Always confirm your wheel's seat type before purchasing replacement nuts.

Common Reasons for Replacement

  • Rounded or damaged hex from incorrect socket use
  • Cross-threaded nuts from incorrect fitment
  • Corrosion or seizure after years of exposure to road salt, mud, or moisture
  • Missing nuts after wheel removal at a tyre shop
  • Upgrading to aftermarket wheels requiring compatible hardware

Workshop Tips

  • Always use a calibrated torque wrench when fitting wheel nuts — never rely on an impact gun alone for final torque.
  • Use the correct 19mm socket — a worn or incorrect socket can round the hex.
  • Retorque after the first 50–100km following any wheel removal.
  • Do not use lubricant or anti-seize on wheel nut threads unless specifically recommended — it affects the torque reading.
  • Replace nuts in sets if corrosion is present — don't mix old and new hardware on the same wheel.

Related Parts to Inspect

Wheel studs, hub face condition, and wheel centre caps if refitting factory alloy wheels after off-road use or storage.

Customer FAQs

Q: Are these sold individually or as a set?
A: These are priced and sold individually. The WK2 Grand Cherokee uses 5 nuts per wheel (20 total for all 4 wheels). Order the quantity you need.

Q: Will these fit my aftermarket wheels?
A: These are 60-degree tapered seat nuts suited to factory WK2 alloy wheels. Many aftermarket wheels use the same tapered seat, but confirm your wheel's seat type before ordering.

Q: What torque should I use?
A: The factory specification for WK2 Grand Cherokee wheel nuts is 130 Nm. Always confirm with your workshop manual and retorque after the first 50–100km of driving.